New docs portal launching December 21st! All Exabeam, LogRhythm, and API documentation is moving to docs.exabeam.com. Existing links will redirect automatically, but we recommend updating your bookmarks.
2026.10 2026.08 2026.07 2026.06 2026.05 2026.04 2026.02 2026.01
2026.10 2026.08 2026.07 2026.06 2026.05 2026.04 2026.02 2026.01

Install Rocky Linux 9

This guide outlines the procedure to install Rocky Linux 9.

Rocky Linux versions 9.1 and later are compatible with the Open Collector.

Prerequisites

  • Internet access and web browser

  • VMware (Workstation or Player) or another VM platform

  • The Rocky Linux host should have the firewall configurations outlined in the Open Collector Networking and Communication topic.

Rocky Linux 9 Installation Setup

  1. Download Rocky Linux 9 from https://download.rockylinux.org/pub/rocky/9/isos/x86_64/

    Rocky Linux versions 9.1 and later are compatible with the Open Collector.


  2. Create a VM with the following settings:

    • CPU: 8 cores (or more)

    • RAM: 8 GB (or more)

    • HDD: 50 GB (or more)

    • DVD: Rocky-9.x-x86_64-dvd.iso

    • User: In addition to the root user, create the following user:

      • username: logrhythm

      • password: <enter a password of your choice>

  3. On initial boot, log in as the root user.

  4. Add the new "logrhythm" user to the sudoers wheel:

    usermod -aG wheel logrhythm
    


  5. Reboot the VM, and log in as the "logrhythm" user.

Install Rocky Linux 9

  1. Boot your VM with your installation media attached to the virtual CD-ROM drive (.iso format).
    image2023-6-23_13-42-42.png

  2. Select Install Rocky Linux 9.X.0.

  3. Wait for the media check to complete.
    image2023-6-23_13-43-36.png

  4. Once the Rocky Linux 9.X installer GUI starts, select your language localization settings.
    image2023-6-23_13-46-2.png

  5. Click Continue.
    The Installation Summary screen appears.
    image2023-6-23_13-46-53.png

  6. In the System section, click Network & Host Name.
    This is required to get networking on your VM without manual configuration.

  7. In the upper-right corner, click the toggle switch to On.  
    image2023-6-23_13-51-29.png
    The VM retrieves an IP address and DNS settings using DHCP.

  8. In the upper-left corner, click Done.
    The Installation Summary screen appears.

  9. In the Localization section, click Time & Date.  
    The Time & Date screen appears.
    image2023-6-23_13-52-59.png

  10. Confirm the date and time are correct. 

    You can also use the Network Time (NTP) option (networking must be configured to use this option).


  11. In the upper-left corner, click Done.
    The Installation Summary screen appears.

  12. In the System section, click Installation Destination.  
    The Installation Destination screen appears.
    image2023-6-23_13-56-36.png

  13. Ensure your local disk is selected. The recommended disk capacity is 50GB.

  14. In the upper-left corner, click Done.
    The Installation Summary screen appears.
    image2023-6-23_13-57-53.png

  15. In the bottom-left corner under USER SETTINGS, click Root Password.
    The Root Password screen appears.
    image2023-3-22_18-45-23.png

  16. Enter your desired password and check the Allow root SSH login with password checkbox.

  17. In the upper-left corner, click Done.
    The Installation Summary screen appears.

  18. In the bottom-right corner, click Begin Installation.
    The Installation Progress screen appears.
    image2023-6-23_14-1-1.png

  19. Once the installation is completed, click on Reboot System at the bottom right corner.
    image2023-6-23_14-15-45.png
    The SETUP screen appears after reboot.

  20. Click on the Start Setup button.
    image2023-6-23_14-26-56.png
    The Privacy screen appears.
    image2023-6-23_14-28-14.png

  21. Keep the default privacy settings and click Next in the top-right corner.
    The Online Accounts window appears.

  22. Optionally, configure your online account, or click Skip in the top-right corner.
    image2023-6-23_14-29-14.png
    The About You window appears.

  23. Enter appropriate details for the logrhythm user and click Next in the top-right corner.
    image2023-6-23_14-30-48.png
    The Password window appears.

  24. Enter a strong password, and then click Next in the top-right corner.
    image2023-6-23_14-40-47.png

    You can also create a logrhythm user manually after installation.

    The Setup Complete window appears.

  25. Click the Start Using Rocky Linux button.
    image2023-6-23_14-41-43.png

    Make sure to remove the installation media. The method for removal is hypervisor-specific.