If LDS v2 is not performing as expected, adjust the following settings.
Mediator
-
On the main toolbar, click Deployment Manager.
-
Click the Data Processors tab.
-
Double-click the Data Processor you want to configure.
The Data Processor Properties window appears. -
In the lower-left corner, click Advanced.
The Data Processor Advanced Properties window appears. -
Configure the values of the following components as needed:
Property
Range
Default
Description
Recommendation for Performance Improvement in LDS v2
AIE Provider: Sending
FlushBatch
1000–10000
1000
Maximum number of logs that should be batched and sent to the AI Engine Communication Manager during each socket send.
10000
Mediator: General
MaxServiceMemory
512–65536
10240
Maximum memory (in MB) allowed for the Data Processor process.
20240
Mediator: LDS
LDSDistributionQueueSize
1000–100000
10000
Specify the size for each log distribution receiver queue. Every receiver has its own queue. If this queue reaches maximum size, logs are dropped. However, setting queue size too high could result in excessive memory utilization.
10000
LDSDistributionThreadCount
1–100
10
Specify the number of threads to use for the log distribution receiver process.
10
LDSEngineQueueSize
1000–500000
60000
Specify the size of the primary log distribution queue. If this queue reaches maximum size, logs are dropped. However, setting queue size too high could result in excessive memory utilization.
60000
LDSEngineThreadCount
1–100
5
Specify the number of threads to use for the primary log distribution process.
5
System Monitor
-
On the main toolbar, click Deployment Manager.
-
Click the System Monitors tab.
-
Double-click the System Monitor you want to configure.
The System Monitor Agent Properties window appears. -
In the lower-left corner, click Advanced.
The Agent Advanced Properties window appears. -
Configure the values of the following components as needed.
Property
Range
Default
Description
Recommendation for Performance Improvement in LDS v2
General
FlushBatch
1–10000
1000
Set the number of logs to flush before throttling sends.
10000
-
Click OK.