Turn On the Appliance

Your new NetMon appliance is equipped with a redundant power supply configuration, which consists of two individual hot-swap components. For hot-swapping to occur, each of the two power supplies must be powered with its own cord. NetMon appliances equipped with non-redundant power supplies will only require one power cord. LogRhythm recommends also using a fault-tolerant power source, such as an Uninterrupted Power Supply (UPS).

1. Connect the power cables.

2. Bend the system power cable into a loop, then secure the cable in the provided strap.

3. Plug the other end of the cables into a grounded electrical outlet or a separate power source, such as a UPS or a Power Distribution Unit (PDU).

4. Turn on the system by pressing the power button. The power indicators light up